How clean shoes

Any pair of shoes can not be permanent is not clean, then, how clean the MBT health shoes? Regular cleaning shoes, gently wipe with a damp cloth (be careful not to use too much water), dirt and more places to squeeze some toothpaste on it, and then clean the brush, cleaning should be upper dry, do not brush fierce brush. Shoes to avoid flooding, exposure, and roasted, so as to avoid deformation and upper broken shoes. Avoid contact with shoes, acids, alkalis, oil, corrosive solvents. Can be replaced to maintain more than two pairs of shoes, so shoes turns off.
Note specifically dedicated to shoes, casual shoes, sandals should not do strenuous exercise, indoor MBT shoes are not allowed to do strenuous exercise outdoors.
Maintenance instructions wearing MBT shoes
1, when the shoes wear dirty, scrub gently with water dipped in detergent, then rinse thoroughly with water, place a dry cool air, avoid direct sunlight. Never use heat or open flame drying, mtb shoes to avoid aging, a plastic, fading and serious deformation. Excessive direct sunlight, heat and hairdryer are inappropriate methods of care will reduce the life of the shoes; washing could not be a long soak, soaking time generally should not exceed 20 minutes. Real leather is not water immersion;
2, if long term storage, should be first brush shoes clean, dry, cool and ventilated storage place, so that the shoes have sufficient time to dry to avoid mildew. Real leather is best to use shoes or shoe care hold up ball of paper in order to avoid serious distortion. Shoe soles will head down toward the wall, ventilated place to dry at room temperature, immersed in water so as to prevent the end of foam material; (because foaming material is not easy to do, therefore do not recommend flat shoes wet.)
3, MBT shoes most of the raw material is a synthetic polymer materials (mostly non-woven polyester mesh and nylon-based artificial leather, shoes and more use made of rubber or foam rubber), some upper is leather, so avoid contact with fats and oils of organic reagents and solutions, but also not in high temperature environment for a long time wear. Normal wear or washing at a temperature not higher than 45 degrees Celsius;
4, to enable you to achieve a satisfactory wear results, fair treatment you wear your shoes. Remember not to wear normal running shoes or walking shoes for soccer and other strenuous exercise.
5, for the use of MBT shoes look more beautiful, make you wear or do not use the process of scrub brush or too hard and tough, but can not pull the nails or sharp edges of these parts of the printing pattern. In the wear period of time, the surface of some patterns may be some small cracks (in particular, often tortuous parts), which are a normal phenomenon;
6, a day training athletes, the best preparations for more than two pairs of MBT shoes to replace every day;
7, nylon mesh cloth shoes and artificial tanning is relatively easy to maintain, hand wash with water, it is best not to use washing machines to wash or water immersion;
8, runners or sports enthusiasts should always wear the black leather shoes purchased MBT. In order to extend the life of shoes, wash as little as possible;
9, separate from the shoes and laces with neutral soap / washing powder. Shoe insoles wash out, gently scrub with a soft brush, and finally rinse; have an investment called health investment. Health MBT shoes to help your health is worth the investment.